A colleague pointed me toward an article in the LA Times last week, which lays out a plan to remove financial incentives legally bestowed on solar photovoltaics (PV) to the detriment of utility power companies. The plan is spearheaded by the Koch brothers and their political action group, Americans for Prosperity.
In summary, they target two laws that give a big boost to solar: net metering, and renewable mandates. Both impart crucial advantages to solar installations that can change the economics by a large factor.
Electric Car: They Might Be Giants
Some time ago, the Chevy Volt attracted my attention. I think the plug-in hybrid concept hits the sweet spot for American drivers, and the Volt’s 35–40 mile electric-only range seemed to be the perfect number. A pure electric vehicle (EV) would not permit my wife’s periodic work-related jaunt to Pasadena, so any battery-powered solution for us must be of the plug-in hybrid electric vehicle (PHEV) variety. The problem, ultimately, was the high price tag (and the hump in the middle of the back seat occupied by the battery). Although I don’t self-identify as being in the “upper class,” our income edges us into the top quintile in the U.S. So for us to decide that the Volt costs too much—despite genuine enthusiasm—seemed to spell trouble (indeed, the average income of Volt owners was claimed to be $175,000). My conclusion was that electric/plug-in cars are out of reach, and could well remain so.
In April of this year, I became aware of the Ford plug-in, called the C-Max Energi (yes, with an “i” at the end!). The C-Max Energi has a 21 mile electric-only range, and gets an EPA rating of 43 miles per gallon (2.3 gal/100 mi; or 5.4 L/100 km). The price tag is approximately $6k cheaper than the Volt, and the back seat passed my wife’s approval. Nonetheless, after carefully considering the C-Max Energi as a replacement for our increasingly ailing car, we decided against springing for one: still too expensive. I was all set to write a Do the Math post to the tune of “Almost bit on a PHEV again.”
But the fact remained that our 11-year old 28 MPG car (bought used) has been costing us a fair bit in maintenance, its reliability increasingly dubious. Replacement loomed. Motivated by an upcoming long-haul road trip, we explored options again, looking at hybrids and the C-Max Energi. In the end—aided by a federal tax credit, a California rebate, and an unfathomably good offer that together knocked $9k off the MSRP—we drove an Energi off the lot under battery power.
It turns out that:
- the lifetime cost for the PHEV is still higher than other options we considered, but not prohibitively so given credits, rebates, and discounts;
- the CO2 emissions are cut in half in electric mode (considering upstream electricity production in our region);
- batteries still stink compared to liquid fuel, and likely always will.
A short while back, I described my standalone (off-grid) urban photovoltaic (PV) energy system. At the time, I promised a follow-up piece evaluating the realized efficiency of the system. What was I thinking? The resulting analysis is a lot of work! But it was good for me, and hopefully it will be useful to some of you lot as well. I’ll go ahead and give you the final answer: 62%. So you could peel away now and risk using this number out of context, or you could come with me into the rabbit hole…
When it comes up in casual conversation that I do not generally heat or cool my house, people either move to another seat or look at me with some mixture of admiration and disbelief. When non-Californians then find out that I live in San Diego, they might huff or spew, which often involves some embarrassing projectile escaping their mouth. But the locals are more consistently impressed—more so by my forsaking heat than AC (San Diego has very mild summers by U.S. standards). This summer, I turned on the AC for the first time since we bought the house three years ago. All in the name of science! I was blown away. Here is what I learned.
I have made repeated references in past posts to the modest off-grid photovoltaic (PV) system I built to cover a large share of our—again modest—electricity usage. By popular demand, I’ll take you on a tour of the system: it’s history, its composition, and adaptation to my house.
In 2007, I acquired a single, second-hand solar panel—intent on doing something useful with it. Confronted with a variety of options, and eager to explore multiple paths, I purchased a second panel and proceeded to set up a dual system: two stand-alone off-grid PV systems mounted side by side. It was really cool. I was able to power my television console and living room lights off of the two systems, while experimenting with different components and learning to live (part of) my life on natural power. I wrote a comprehensive article about how to size and design such a system, which may be worth reading first. Since that initial success, I have incrementally expanded my system so that I now get more than half of my electrical power from eight panels sitting in the sun. This is their story.
I have enough to say about my solar setup (and PV systems in general) that I must break this topic into multiple posts. In this, the first, I will describe the components, functions, and evolution of the system. In a future post, I will present system performance data and an assessment of efficiency of the various components. Perhaps even later I can explore the impacts of panel orientation, tracking, horizon obstructions, and geographic location.
My wife calls it spying. I call it data. To-may-to, To-mah-to. It’s true that I know what she’s been up to (electrically) while I’m away. And it’s true that I can access this information anywhere in the world that has an internet connection. But domestic surveillance is not my aim (cameras and microphones would be far more informative in that regard). I just care about the energy angle.
In this post, I will present example results from monitoring and recording my home electricity use, demonstrating the marvelous secret world it reveals. My interest lies in putting numbers on my own behaviors, and in characterizing the appliances in my house. Some of this rubs off on my wife, and some of it rubs her the wrong way. But as I explained in an earlier post, I kept a note she once wrote that said: “Okay, TED’s pretty cool.”
Who is TED? TED is The Energy Detective. That same earlier post told the story of TED’s tortured journey to our home—a tale of excitement, rejection, and ultimate acceptance.
This post is not meant to convey anything deep and meaningful about the energy challenges we face, except for the fact that those challenges provided a background motivation for me to explore and monitor energy data in my home (it should be obvious by now that I’m a data-holic). Rather, I will simply showcase a number of data captures from TED so you can see for yourself the interesting hidden behaviors of appliances, and develop some intuition about how much of a toll various devices take.
2 views this month; 2 overall
Two weeks ago, I described my factor-of-five reduction of natural gas usage at home, mostly stemming from a decision not to heat our San Diego house. We have made similar cuts to our use of utility electricity, using one-tenth the amount that comparable San Diego homes typically consume. In this post, I will reveal how we pulled this off…with plots. Some changes are simple; some require behavioral changes; some might be viewed as outright trickery.